ASME A112.6.2:2000 pdf download FRAMING-AFFIXED SUPPORTS FOR OFF-THE-FLOOR WATER CLOSETS WITH CONCEALED TANKS
1 GENERAL
1.1 Scope
This Standard establishes minimum performance re-quirements for framing-affixed supports for off-the-floorwater closets with concealed tanks. It is not intendedto limit the use of other materials，finishes,and designsthat equal or exceed the requirements of this Standard.
1.2 Units of Measurement
Values are stated in U.s. Customary units and theInternational System of Units (SI). The U.s. Customaryunits shall be considered as the standard.
1.3 References
The following documents form a part of this Standardto the extent specified herein. The latest issue shallapply.
ASME A112.6.1M,Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for Public Use
ASME A112.19.2M. Vitreous China Plumbing FixturesPublisher: The American Society of Mechanical Engi-neers (ASME)，Three Park Avenue，New York,NY10016-5990
ANSI/ASSE 1002, Water Closet Flush Tank Fill ValvePublisher: American Society of Sanitary Engineering(ASSE)，28901 Clemens Road,Westlake,OH 44145
1.4Definitions
Anumber of special terms，which are specific tothe supports described by this Standard,are definedherein. For additional terms pertinent to support andcarrier nomenclature,see ASME A112.6.1M.
carrier: a concealed support for an off-the-floorfixture.
combination water closet support and fitting:an as-sembly for supporting off-the-floor water closets，which includes both support- and waste-fitting componentsand a concealed flush tank. See Fig. 1.
fitting(s):the sanitary waste-fitting component(s) of acombination water closet support and fitting.
.fixture bolts: the bolts on which the fixture is mounted,and which connect directly to the carrier.
foot:a member of a carrier，designed to rest on thefloor in a concealed location to anchor and supportthe assembly.
gasket, fixture: the scaling element between fixtureand fittings.
integral tank:a flush tank that is provided as anoption to the support assembly for the purpose offlushing the wall-hung fixture，which is usually con-cealed behind the finished wal1.
off-the-floor fixture:any sanitary plumbing fixture,located adjacent to a wall (partition),which has novisible contact with the floor in front of the wall.
2 MATERIALS AND FINISHES
Materials and finishes used in supports and carrierassemblies shall conform to the material requirementsas cited in ASME A112.6.1M. Waste fittings shall beof cast iron，bronze,plastic，or other materials capableof withstanding the pressure testing in section 4.
3 REQUIREMENTS
3.1 General
Off-the-floor framing-affixed supports for water clos-ets shall consist of an integral tank,a supply pipe tothe water closet，a waste fitting from the water closet,and support assembly. The support assembly shall incor-porate as a minimum a support structure complete withfasteners to mount and connect the fixture,fitting,andpiping to carry the waste from the fixture into thewaste line, means to affix the assembly to the structuralfloor or wall, and any necessary gaskets to connect
ASME A112.6.2:2000 pdf download
